Effects of Steam Injection Flow in Burner and Outside Water Tube to the Increasing of Boiler Temperature

Bustan, M. Djoni (2007) Effects of Steam Injection Flow in Burner and Outside Water Tube to the Increasing of Boiler Temperature. Effects of Steam Injection Flow in Burner and Outside Water Tube to the Increasing of Boiler Temperature, 7 (2). pp. 120-126.

[img]
Preview
PDF - Published Version
Download (459Kb) | Preview

    Abstract

    Energy is an expensive basic need for human life, especially energy from fossils, such as crude oil, gas, and coal. In an oil refinery factory or electrical generator unit, where heat is most dominantly utilized, the boiler is used to generate steam. The main problem in a boiler is its uncompleted combustion process because of the incomplete ratio of air–fuel. This problem is caused by the addition of deposits or sealing inside and outside of the tube fire heater which will reduce the performance of fired heater. The objective of this research is to study the effect of steam flow variation on burner and tubing for increasing heat and temperature as well as the quality of steam. This research used a package boiler B& W series 1986 model which can be seen at an oil refinery factory or steam power electrical generator unit in Indonesia. This package boiler has 50kg/hours steam production capacity, qualified superheated steam, maximum pressure and temperature at 7kgs/cms2 and 700oC. Quantitatively, the achievable heat efficiency which corresponded to the temperature increase caused by the steam injection is 4 1.25% and the specific enthalpy is 12.07%.

    Item Type: Article
    Subjects: T Technology > TP Chemical technology
    Divisions: Faculty of Engineering > Department of Chemical Engineering
    Depositing User: Budi Santoso
    Date Deposited: 31 Oct 2012 09:23
    Last Modified: 31 Oct 2012 09:23
    URI: http://eprints.unsri.ac.id/id/eprint/1383

    Actions (login required)

    View Item